Happilac liquid Grout G-200 is a general-purpose non-shrinking two-component cementitious grout with enhanced working life. It is a polymer-modified reinforced two-component grout that has been formulated as a durable, high-performance, and water-resistant tile grout. It has been specifically engineered to be highly fluid, non-bleed, non-shrinking with high workability, and resistive against cracks or shrinkage.
- High workability and excellent application properties
- Water proof and Fungal resistant
- High bonding strength
- Suitable for tropical and hot climate
- Shrinkage /Crack resistant
- Durable and long lasting
- Less fading of color
- Easy to use
Happilac Hi-Grout G-200 is comprised of carefully selected colored aggregate and a specially formulated cementitious chemical binder which enables to achieve high compressive strength in a short time. When these two components are mixed, a uniform paste is formed which adheres very strongly to the substrate and has an effective penetration in void spaces.
Allow at least 24 hours between fixing tiles and grouting. Prior to application, the surface must be cleaned from any dust, wax, oil or grease, etc which can reduce the properties of the product. Mix both components i.e. the powder part and the liquid part in a container and stir continuously until a uniform paste is formed. Make sure that no lumps are formed during mixing.
When the paste is ready, start applying into the void spaces between tile joints with a scraper or squeegee. Remove surplus grout with a wet cloth and don’t let the extra grout be dried onto the surface. It can be used up to 3-4 mm void space between tiles.
- In case of eye contact, rinse with plenty of water for at least 10 minutes.
- Don’t breathe spray mist or dust.
- Ensure proper ventilation when applying.
- Harmful. If swallowed, seek medical advice.
- When empty, don’t use its sack for edible storage.
- Place out of reach of the children.
- When empty, don’t use its container for edible storage
- Curing may take a minimum of 3 days
- During application, allow each coat not to dry completely and must be moist
- Do not apply if the temperature is likely to drop 7oC or rainfall is expected in the next 24 hours
- Do not apply in direct sunlight or when the temperature will exceed 35-40oC under direct sunlight