Happilac WeatherCem is a high-performance single component polymer modified cementitious micro-topping that can be brushed and sprayed on a variety of horizontal and vertical surfaces such as brick, concrete, cement, plaster, fiberboard, etc.
- Durable and long-lasting
- No settling/separation after mixing with water
- Super adhesion
- Water permeable and breathable
Happilac WeatherCem is a high-performance single component polymer modified cementitious micro-topping that can be brushed and sprayed on a variety of horizontal and vertical surfaces such as brick, concrete, cement, plaster, fiberboard, etc. It gives a decorative and protective cementitious topping that is resistant to dampness and water seepage.
Application temperature should be between 50oC to 35oC. Always test a small area and ensure bonding ability and satisfaction of appearance before total application. Happilac Weathercem must be applied on the substrate and after application must be cured with water.
- When applying, wear appropriate eye protection.
- In case of eye contact with the product, rinse with plenty of water for at least 10 minutes.
- Don’t breathe spray mist or dust.
- Ensure proper ventilation when applying.
- If swallowed, it may cause serious damage.
- When empty, don’t use its sack for edible storage.
- Keep out of reach of the children.
- Pregnant women are advised to avoid breathing paint mist or spray.
- In case of any emergency, undergo medical supervision as soon as possible.
CAUTION: Scraping/sanding off previously painted surfaces may release lead dust or fumes. Lead is highly toxic; take protective measures thoroughly when rubbing off the old surfaces.
- Curing may take a minimum of 3 days
- During application, allow each coat not to dry completely and must be moist
- Do not apply if the temperature is likely to drop 7oC or rainfall is expected in the next 24 hours
- Do not apply in direct sunlight or when the temperature will exceed 35-40oC under direct sunlight